Inventory

• 1 x Pic 16F84 (Programmed) - 16C84 will also work
• 1 x 16*2 LCD (Hitachi HD44780 compatible)
• 1 LM7805 5v voltage regulator
• 1 x 4Mhz Ceramic Oscillator (3 pin preferable)
  • (if 2 pin then 2 additional capacitors 22pF or 33pF are required)
• 1 x 10K Preset Pot (for brightness control)
• 1 x 10K Pot for volume control (small preset fine if not enclosing in a box)
• 4 x 10K Resistors (1/8 or 1/4W are fine)
• 2 x 100nF Capacitors (disk ceramic are fine)
• 1 x 3.5mm Stereo Jack Socket
• 4 x Momentary Push To Make Switches
• PP3 9v Battery (+ Battery Snap)
• 18 Pin DIL socket for PIC
• Pins, Sockets and Mounting Hardware (as appropriate) for LCD
• Stripboard or PCB

Optional

• LED (to indicate power on)
• 330 Ohm Resistor (current limiter for LED)
• LM386 Audio Amp (etc) + Small Speaker
• Power connector for external 9-12v PSU